Fiberoptisk adapter/dæmpere

In-Line Variable Fiber Singlemode Simplex optiske dæmpere Op til 50 dB-dæmpning Valgfri

Produkt beskrivelse

Anetfiber’s Singlemode Variable Optical Attenuators allow the user to manually vary the attenuation of the signal in the fiber as it is transmitted through the device. These VOAs can be used to to precisely balance the signal strengths in fiber circuits or to balance an optical signal when evaluating the dynamic range of the measurement system. The maximum specified attenuation is achieved within 10 turns of the adjustment screw. Please see the Attenuation Data tab for more information. All in-line VOAs have single mode fiber pigtails with a 3.0 jakke. The VOAs are offered unterminated or terminated with 2.0 mm narrow key FC/PC or FC/APC connectors. For other connector styles or custom requests, please contact Technical Support. Each attenuator has a lens to collimate the light from the input fiber. A blocking device or window can be manually adjusted by a screw (see schematics below). Så, a second lens is used to couple light into the output fiber. Thus, the coupling efficiency is changed until the desired attenuation is obtained.